1700W Rebar Bender and Cutter Machine. 1/4” to 1 Rebar Diameter & 6-7S Bending Speed & 5-6S Cut-Off Speed. The rebar bender and cutter machine can bend 1/4”(#2) to 1(#8) (6 to 25 mm) rebar to 0-180°in 6-7 seconds. Cut-off speed: 5-6 seconds. Two standard foot pedal control switches for hands-free bending. This rebar bender cutter is multi-purpose for construction or all kinds of other things related to rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel bending. It is ideal for manufacturers who need simple, easy-to-use, consistent, and accurate steel bending machines. A must-have for the professional concrete installer! 1700W Pure Copper Coil Motor. Easy to Operate & Transport. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. High Bending & Cut-off Speed. The steel rebar bender bends 1/4” to 1″ (6 to 25 mm) / 1/4” to 1-1/4″ steel super fast in just 6 -7 seconds and cuts steel in 5-6 seconds. The bending speed depends on the thickness of the rebar and the angle you want to reach. Adjust the angle you need by moving left or right, and after angle adjustment is set accurately, ensure that the angle setting handle is fixed. When you find some abnormal during the operation, you must press down emergency stopped to close down the machine’s operation. The high-strength Ø78 Gyre Idler Wheel and Ø94 Fixed Idler Wheel are made of iron materials, are more firm, and not easily deformed. Besides, exceeding designated material specifications greatly increases this risk and will also damage the tool. The rebar bending machine features a 100% pure copper core high-power motor with double endurance for high conductivity, low noise operation, high-temperature resistance, and saves energy for a long time. Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A). Humanized Foot Pedal & Handle. The foot switch connection to point 1,2 will make it more convenient to go to work. And when pressing the starting switch or the foot switch will bend the rebar to the angle you have set. When moving the bender by fixing the handle, 4 bolts can not loose, then move the bender together by 4 handles. The hydraulic rebar bender is widely applied in construction engineering / bridge construction / railway viaduct / dock highway bridges / electric power building. Perfect for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc. Rebar Diameter: 1 / 25 mm #8 Grade 60. Rebar Diameter: 1/4” / 6 mm #2 Grade 60. Bending Speed: 6-7 Seconds. Bending Radius: 1.57” / 40 mm. Cut-Off Speed: 5-6 Seconds. Hydraulic Oil Type: VG46. Noise: 92 dB(A). Item Dimensions(L x W x H): 19.69 x 17.72 x 31.1” / 50 x 45 x 79 cm. Packing Size(L x W x H): 22.44 x 18.9 x 38.58” / 57 x 48 x 98 cm. Net Weight: 299.82 lbs / 136 kg. Gross Weight: 368.17 lbs / 167 kg. Application: Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc. 1 x Electric Rebar Bender and Cutter. 2 x Foot Pedals. 3 x Tension Springs. 4 x Carbon Brushes. 1 x User Manual. Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4” #2 to 1 #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Radius: 1.57” / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46. 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter’s operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise. Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally. Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Easy to Operate & Transport: This heavy-duty rebar cutter bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc. Rebar Bebder Rebar Cutter 25MM. Rebar Bebder & Rebar Cutter 25MM. Electric Rebar Bender Machine. Rebar Dia 4-16mm(5/8”). Rebar Dia 4-22mm(7/8”). Rebar Dia 4-25mm(1”). We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. This item is in the category “Business & Industrial\Light Equipment & Tools\Hand Tools\Concrete Tools”. The seller is “audiyeah-1″ and is located in this country: US. This item can be shipped to United States, Canada.
- Brand: VEVOR
- MPN: TSGJWQJD25DWHYM01
- Model: RBC-25
- Tool Type: Rebar Bender and Cutter Machine
- Voltage: 110V
- Power: 1700W
- Frequency: 60 Hz
- Amps: 14A
- Bending Angle: 0-180°
- Max. Rebar Diameter (Ø): 1\
- Min. Rebar Diameter (Ø): 1/4” / 6 mm #2 Grade 60
- Bending Speed: 6-7 Seconds
- Bending Radius: 1.57” / 40 mm
- Cut-Off Speed: 5-6 Seconds
- Max. Rebar Hardness: HRC30
- Hydraulic Oil Type: VG46
- Noise: 92 dB(A)
- Material: Iron
- Item Dimensions(L x W x H): 19.69 x 17.72 x 31.1” / 50 x 45 x 79 cm
- Packing Size(L x W x H): 22.44 x 18.9 x 38.58” / 57 x 48 x 98 cm
- Net Weight: 299.82 lbs / 136 kg
- Gross Weight: 368.17 lbs / 167 kg
- Certificate: CE
- UPC: 8085442837676